Publicité
Les langues disponibles
Les langues disponibles
Filling the Water Reservoir
Caution
Always pull out the mains plug and allow the device to cool down completely before you
•
open the water reservoir. Otherwise there could be an uncontrolled emission of steam.
Do not overfill the water reservoir. Pour a maximum of 260 ml of water into the device.
•
Never hold the device under the tap and never immerse it in water to pour water into the
•
reservoir.
Never pour any cleaning agent or other additives into the device. This could destroy the
•
device and safe working is no longer guaranteed.
1.
The device has a safety reservoir cap (12). It cannot be removed if the water reservoir is
pressurised. Press the reservoir cap down and unscrew it in the anticlockwise direction.
To release pressure from the water reservoir, keep pressing the steam trigger (15)
until steam stops emerging from the device. The water reservoir can then be opened.
2.
Pour water into the water reservoir using the measuring cup and the funnel supplied.
3.
Screw the reservoir cap back into the device.
Use
•
Never aim steam directly at people, animals or plants. This can cause severe scalding.
•
Only ever hold the device by the handle and not by the attachment while operating the device
as it can become very hot. There is a danger of scalding!
•
Always work with sufficient lighting.
•
Make sure that you do not trip over the mains cable while using the device.
•
Never use the device without water!
•
Never use the device on cold glass surfaces or at outside temperatures of below 10 °C. The
hot steam could cause the glass to shatter.
•
Always try cleaning first at a small, inconspicuous spot.
•
Never direct the steam at one spot for too long.
Publicité
