Hkoenig nv720 Manuel D'instructions page 22

-Press the combination attachment and the scraper lip together
Floor Attachment, Extension tube, Adapter
Plug the adapter (2) as far as it will go onto the steam nozzle (19) of the device and
1.
screw it on tight.
2. Screw the connecting piece into the floor attachment.
Push the narrow end of the extension tube into the connecting piece. The locking
3.
lug of the extension tube must lock in the matching opening in the connecting piece.
In the same way, plug the adapter into the open end of the extension tube or, for a
4.
longer tube, the second extension tube and then the adapter into this.
To disassemble the extension tube, press the release buttons on the extension tube and
adapter and pull it out
To remove the adapter from the device, turn it in the opposite direction and pull it off.
Floor Cloth
attachment and secure it in the second clip.
until they are heard to lock together.
To release the scraper lip, pull the catch of the scraper lip away
from the combination attachment.
The floor attachment (4) is used for cleaning floors. It is
attached to the device with the aid of the connecting piece
(5), extension tube (3) and adapter (2). You can use the floor
attachment with or without a floor cloth. Without the
floorcloth the bristles of the floor attachment will remove
stubborn dirt. The floor cloth is suitable for gentle cleaning.
Use the floor cloth to gently wipe down the floor.
The floor attachment
1.
Press down the end of the clip in the middle of the floor
attachment to open the clip.
Insert one end of the floor cloth and release the clip.
2.
Stretch the floor cloth over the bottom of the floor
3.
4
has two clips on the top of it.
( )