ROQUES LECOEUR RL9102 C Manuel D'utilisation Et D'entretien page 104

(continued)
INTERVAL
AFTER 50 HOURS
AFTER 50 ENGINE
HOURS
AFTER 100 HOURS
AFTER 200 ENGINE
HOURS
MONTHLY
BEFORE THE
SEASON
AFTER THE
SEASON
(PUTTING OUT OF
OPERATION)
Explanations for table:
1 = Replace more frequently if the riding mower is under greater load or works in outdoor temperatures around 35°C or higher.
2 = If the mower works in a dusty environment, perform the inspection more frequently.
3 = Perform the inspection more frequently if the mower works in a sandy environment.
4 = Perform the inspection more often if a new belt has been fitted.
N = Manual of the manufacturer, supplied with the mower.
Apart from regular maintenance according to the above table, it is necessary to replace motor oil based on the recommendations in
the manual drawn up by the engine manufacturer, which is included with the riding mower.
ASSEMBLY
Air filter and spark plugs
Lubrication
Hydrostatic transmission on 4x4
systems
Engine, transmission,
electromagnetic transmission
Hydrostatic transmission on 4x4
systems
Tyres
Mowing deck
Fuel filter
Battery
Travel drive belt
Mowing deck
Front axle and steering
Engine
Cables
Mowing deck
Inspection, replacement if necessary
Lubrication of parts according to lubrication plan
Oil change
Inspection and adjustment of motion
Oil change
Inspection of pressure
Inspection of tension of the cogged blade drive belt
Replacement
Inspection of electrolyte and cleaning
Inspection and adjustment
Inspection of tension of the cogged blade drive belt
Inspection of the correct tension of the mowing deck drive
V-belt
Inspection and adjustment of play
Oil change
Inspection of mounting, inspection of quick coupler parts
Cleaning
104
ACTIVITY
1,2 6.3.2
6.4
6.3.16
N
6.3.16
6.2.1
6.3.9
N
6.3.1
6.3.12
6.3.9
6.3.8
6.3.11
6.3.2
6.2.1
6.2.2