Overload Protection; Cleaning And Care - WMF KUCHENminis Série Mode D'emploi

Overload protection

The appliance is fitted with an overload protector. This prevents the motor being damaged by
overloading. If the appliance switches off during operation, proceed as follows:
▪ Set the speed controller to the Off position (0), pull out the mains plug and allow the appliance to
cool down for approx. 20-30 minutes.
▪ Once the appliance has cooled down, insert the mains plug into the socket again and continue with
processing.

Cleaning and care

▪ Turn the speed controller (10) to the Off position (0) and remove the plug from the mains supply.
Do not immerse the appliance in water, but rather clean it using a damp cloth with a little
washing-up liquid and then dry it.
▪ Do not use harsh or abrasive cleaning agents.
▪ The splash guard (9) may be rinsed under running water.
▪ For easy cleaning, the mixing bowl (8) may also be washed in the dishwasher.
▪ For ease of cleaning mixing jug, drinking lid, and blade unit can be put in the dishwasher.
▪ The silicon seals of the drinking caps can be removed for cleaning. However, before reassembling,
check whether the seal has been reinserted correctly. If not, the mixing container may leak.
24
Dishwasher safe
Food processor
Mixing bowl (8)
Splash guard (9)
Casing (6)
Flat beater (11)
Dough hook (12)
Whisk (13)
Mixer attachment (2)
Mixing jug
Drinking lid
Blade unit
Can be rinsed Wipe with a
under running damp cloth
water
25