Coway Airmega 250 Manuel De L'utilisateur page 22

05 MAINTENANCE
Pollution Sensor
Clean the pollution sensor approximately every 2 months for optimum performance. Follow these instructions
below to clean it.
22
1
Use a soft brush or vacuum cleaner to
clean the air inlet and the air outlet of
the air quality sensor.
· B e careful not to let dust fall inside the product
Air outlet
when cleaning.
Air Inlet
2 Open the air quality sensor cover on
the right-hand side of the product.
(by using the hole on the air quality
sensor cover.)
3 Wet a cotton swab lightly and clean the
lens, dust inlet, and dust outlet. Clean
them with a dry cotton swab to remove
the remaining moisture.
Dust outlet
Lens
Without regular cleaning, the performance of
Dust inlet
the air quality sensor deteriorates.
When using the product in a dusty environment,
clean the sensor more often.
NOTE