Connecting The Power And Turning On The Air Purifier; Connecting The Air Purifier To The Wi-Fi Network (250S Only) - Coway Airmega 250 Manuel De L'utilisateur

Connecting the Power and Turning On the Air Purifier

When your filters are prepared, connect the power and turn on the air purifier.
CAUTION
This product is for 120 V~ 60 Hz use only. Make sure your power supply meets these requirements.
Connecting the Air Purifier to the Wi-Fi Network
Find out the application pairing guide with the link provided below :
https://iocare.coway.com/manual/us/air/airmega250s.html
1 Insert the power plug into a power
outlet.
The indicators on the air purifier will blink.
2 Touch the [Power] button to turn the
air purifier on.
You will hear a chime sound when the air purifier
starts to operate.
CAUTION
Do not touch the control panel while connecting the power.
•
Buttons may not work for a certain period of time.
•
If the buttons do not work, unplug the power cord for
•
about 10 minutes to discharge, and then connect it again.
(250S Only)
13