Medion LIFE P61155 Notice D'utilisation page 51

Devices such as stereo receivers or televisions usually have one red and
one white audio output socket. These are usually marked as OUT, AUDIO
OUT, LINE OUT or similar. To this end, please also note the information in
the user manual for your audio output device.
7.2. Connecting external devices via the optical
connection
You can connect digital amplifiers or televisions with an optical digital output to
the soundbar via the OPTICAL connection. To do this, you will need an optical
digital cable (fibre optic cable, not supplied with the soundbar, but available from
specialist retailers).
 Set the audio output device to a medium volume level and then switch it off.
 Remove the cover cap from the OPTICAL connection on the soundbar.
 Plug the optical digital cable connector into the OPTICAL connection on the
soundbar.
 Plug the other optical digital cable connector into the corresponding digital
output socket on your audio output device.
If an audio sound is not output, switch the audio output format on your
audio output device to PCM (Pulse Code Modulation) mode.
52
A
B