Publicité
Les langues disponibles
Les langues disponibles
REPLACING THE BULB
The bulb is a consumable and therefore not covered by warranty. Before changing the
bulb, remove the trays, the grid, and the guides.
Use a Phillips (cross) screwdriver.
(Halogen lamp: G9, 230 V, 25 W)
28
Firmly re-tighten the screws on the cover using a screwdriver;
otherwise, sparks may appear.
1
Undo the four screws on the cover.
Remove the cover and the glass.
2
Remove the halogen light bulb and
replace it with a new one.
Use protection to avoid burs.
There is a gasket on the cover which
should not be removed. Do not allow the
gasket to be detached from the cover. The
gasket should fit correctly onto the oven
cavity wall.
Publicité
