Braun 7 Serie Mode D'emploi page 10

70S/70B
Series 7
r e l e as e
70S/70B
Environmental notice
Product contains batteries and/or recyclable electric waste.
For environment protection do not dispose of in household waste,
but for recycling take to electric waste collection points provided
in your country.
The cleaning cartridge can be disposed of with regular household waste.
Subject to change without notice.
For electric specifications, see printing on the special cord set.
Trouble-Shooting
Problem:
SHAVER
Unpleasant
smell from the
shaver head.
Battery
performance
dropped
significantly.
Shaving
performance
dropped
significantly.
10
After you have replaced the Foil & Cutter
cassette, use a ball-pen to push the reset button
t
for at least 3 seconds to reset the counter.
While doing so, the replacement light blinks and
goes off when the reset is complete. The manual
reset can be done at any time.
Accessories
Available at your dealer or Braun Service
Centres:
• Foil & Cutter cassette 70S/70B
• Cleaning cartridge Clean&Renew CCR
Possible reason:
1. Shaver head is
cleaned with water.
2. Cleaning cartridge is
in use for more than
8 weeks.
1. Foil and cutter are
worn which requires
more power for each
shave.
2. Shaver head is
regularly cleaned
with water but not
lubricated.
1. Foil and cutter are
worn.
2. Personal setting of
shaving performance
has been changed.
3. Shaving system is
clogged.
Remedy:
1. When cleaning the shaver head
with water only use hot water
and from time to time some
liquid soap (without abrasive
substances). Remove Foil &
Cutter cassette to let it dry.
2. Change cleaning cartridge at
least every 8 weeks.
1. Renew Foil & Cutter cassette.
2. If the shaver is regularly
cleaned with water, apply a
drop of light machine oil on top
of the foil once a week for
lubrication.
1. Renew Foil & Cutter cassette.
2. For a thorough and fast shave
we recommend the green
(intensive) setting.
3. Soak the Foil & Cutter cassette
into hot water with a drop of
dish liquid. Afterwards rinse it
properly and tap it out. Once
dry apply a drop of light
machine oil on the foil.