Tools And Materials; Before You Begin - Kohler K-3437 Guide D'installation

Tools and Materials

Supply
10" Adjustable
Shut-Off
Wrench
Valve
Wax Seal
Tubing Cutter
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Before You Begin

CAUTION: Risk of personal injury or product damage. Handle
with care. Vitreous china can break or chip if the product is
handled carelessly.
DANGER: Risk of electrical shock. Connect to a properly
grounded, grounding-type receptacle, protected by a
Ground-Fault Circuit-Interrupter (GFCI).
A dedicated 120VAC, 15A, 60Hz circuit (protected by a Class A
GFCI) is required for installation.
Observe all local plumbing and building codes.
Carefully inspect the new toilet for damage.
If the existing toilet does not have a supply shut-off valve below
the tank, install one before installing the new toilet.
1021801-2-A
Tape
Level Sponge
Measure
Plus:
• 5/16" T-Bolts w/ Nuts and Washers
• Putty Knife
• Screwdriver
Safety
• Electrical Tools and Supplies
Glasses
• Metal File
2
Hacksaw
Kohler Co.