Compliances
EC Conformance Declaration - Class B
SMC contact for these products in Europe is:
SMC Networks Europe,
Edificio Conata II,
Calle Fructuós Gelabert 6-8, 2
08970 - Sant Joan Despí,
Barcelona, Spain.
This information technology equipment complies with the requirements of the
Council Directive 89/336/EEC on the Approximation of the laws of the Member
States relating to Electromagnetic Compatibility and 73/23/EEC for electrical
equipment used within certain voltage limits and the Amendment Directive 93/68/
EEC. This equipment is also compatible with R&TTE Directive 1999/5/EC for
Electromagnetic compatibility and radio spectrum matters (ERM) Wideband
Transmission sytems; Data Transmission equipment operating in the 2.4 GHZ ISM
band and using spread spectrum modulation techniques, covering essential
requirements under Article 3(2) of the R&TTE Directive. For the evaluation of the
compliance with these Directives, the following standards were applied:
RFI
Emission:
Immunity: * Product family standard according to EN 55024:1998
LVD:
ERM:
ii
* Limit class B according to EN 55022:1998
* Limit class A for harmonic current emission according to EN 61000-3-2/
1995
* Limitation of voltage fluctuation and flicker in low-voltage supply system
according to EN 61000-3-3/1995
* Electrostatic Discharge according to EN 61000-4-2:1995
(Contact Discharge: ±4 kV, Air Discharge: ±8 kV)
* Radio-frequency electromagnetic field according to EN 61000-4-3:
1996 (80 - 1000MHz with 1kHz AM 80% Modulation: 3V/m)
* Electrical fast transient/burst according to EN 61000-4-4:1995(AC/DC
power supply: ±1kV, Data/Signal lines: ±0.5kV)
* Surge immunity test according to EN 61000-4-5:1995(AC/DC Line to
Line: ±1kV, AC/DC Line to Earth: ±2kV )
* Immunity to conducted disturbances, Induced by radio-frequency fields:
EN 61000-4-6:1996(0.15 - 80MHz with 1kHz AM 80% Modulation: 3V/
m)
* Power frequency magnetic field immunity test according to EN
61000-4-8:1993(1A/m at frequency 50Hz)
* Voltage dips, short interruptions and voltage variations immunity test
according to EN 61000-4-11:1994(>95% Reduction @10ms, 30%
Reduction @500ms, >95% Reduction @5000ms)
* EN60950(A1/1992; A2/1993; A3/1993; A4/1995; A11/1997)
* EN 300 328 V1.2.1 (11-2001)
o
a
, 4
,