Cook timer
You can use this timer function to set a cook time for any
element. The element will turn off automatically once the
set time has elapsed.
CAUTION
9
When using the timer, always keep an eye on the
▯
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
This function should not be used for long periods
▯
of time, especially at high heat settings.
Make sure the cooktop is turned off with the main
▯
power switch after each use.
Setting procedure
Select the element and the required power level.
1.
Touch the Cook Timer key. The
2.
indicator light up in the Cook Timer display.
lights up in the display for the element.
y
Within the next 10 seconds, set the required cooking
3.
time using the number keys.
Touch the Cook Timer key to confirm the selected
4.
setting.
The cooking time begins to elapse.
Note: The same cooking time can be set automatically
for all elements. The set time for each of the elements
counts down independently.
You can find information on automatically programming
the cooking time in section on "Cook timer".
14
symbol and the
‹‹
V
Using Cook timer with AutoChef
When you are cooking with AutoChef
cooking time will begin to count down once the
temperature for the selected frying level has been
reached.
Changing or deleting the time
Select the element and then touch the Cook Timer key.
Change the cooking time using the number keys or set
to delete the programmed cooking time.
‹‹
Touch the Cook Timer key to confirm the selected
setting.
When the time has elapsed
The element switches off, the
element switches to power level
sounds.
and the
indicator flash in the timer display.
‹‹
V
When the Cook Timer key is touched, the indicators go
out and the acoustic signal ceases.
Notes
If a cooking time was set for several elements, the time
▯
information for the selected element is shown in the
timer display.
Select the relevant element to call up the remaining
▯
cooking time.
You can set a cooking time of up to
▯
Kitchen timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. The cooktop must be
turned on to use this function.
This function does not automatically switch off an
element.
Setting procedure
Touch the Kitchen Timer key. The
1.
indicator light up in the timer display.
V
Select the required time on the control panel and
2.
touch the Kitchen Timer key to confirm.
After a few seconds, the time begins to elapse.
Changing or deleting the time
Touch the Kitchen Timer key.
Change the programmed time using the number keys or
set
‹‹
to delete the programmed time.
Touch the Kitchen Timer key to confirm the selected
setting.
When the time has elapsed
An audible signal sounds once the time has elapsed.
and the
symbol flash in the timer display.
V
Touch any key to turn off the indicators.
®
the programmed
®
display flashes and the
y
. An acoustic signal
‹‹
minutes.
ŠŠ
‹‹
symbol and the
‹‹