Assembly - Craftsman 919.672241 Mode D'emploi

1. Place handle assembly onto frame
and connect handle to frame.
NOTE: Knobs are assembled to
inside of frame.
2. Connect wand to gun. Tighten
securely.
3. Attach high pressure hose to gun.
Tighten securely.
5. To Assemble Accessories Panel
a. Remove top screws on
handle assembly.
b. Loosen bottom screws on
handle assembly.
D28235

ASSEMBLY

Remove
Loosen
c.
Screws
d.
8- ENG
Place grooves in accessories
panel assembly onto screws
and slide panel assembly into
place.
Place screws (removed
earlier) into the top holes and
secure accessories panel
assembly to handles. Do not
overtighten.