Hilti AIC 1000 Notice D'utilisation Originale page 17

3 Description
3.1 Product overview
3.2 Intended use
The product described is an air cleaner for removing fine dust particles from room air and is designed for
the commercial sector, e.g. for use on construction sites, in hotels, schools, hospitals, factories, stores and
offices, and by rental companies. The product was developed for use in dry rooms where there is no risk of
explosion.
Do not use the product in environments where there is asbestos contamination.
The product is intended for indoor use only.
3.3 Items supplied
Air cleaner, detachable supply cord, pre-filter (3×), main filter (3×), operating instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4 Technical data
4.1 Product properties
For details of the rated voltage, rated current, frequency and/or nominal power input, refer to the
product's country-specific type identification plate.
Weight
Dimensions (L × W × H)
Power source
Power rating (electric tool
power outlet)
Filter surface area (3 main fil-
ters)
*2297300*
1
AIC 1000
15.0 kg
492 mm × 419 mm × 674 mm
1-phase
11 A
3.1 m²
2297300
Pushbar release button
@
Pushbar
;
Pre-filter cover
=
Carrying handle
%
Electric tool power outlet
&
Filter change indicator light
(
On/off switch
)
Transport hook for supply cord
+
Supply cord
§
Discharged-air outlet
/
Main filter
:
Pre-filter
∙
Toggle catch (housing cover)
$
Shutter
£
Dust-stop partition wall adapter
|
Cover for air inlet
¡
AIC 2000
16.3 kg
492 mm × 419 mm × 674 mm
1-phase
11 A
3.1 m²
English 13