Hilti AIC 1000 Notice D'utilisation Originale page 16

▶ Stay alert, watch what you are doing and use common sense when working with the product. Do
not use the product while you are tired or under the influence of drugs, alcohol or medication. A
moment of inattention while operating the product can result in serious personal injury.
▶ Avoid unusual body positions. Keep proper footing and balance at all times.
▶ During use and maintenance of the product, the user and persons in the vicinity must wear suitable
eye protection, a hard hat, ear protection, protective gloves, protective footwear and respiratory
protection appropriate for the dust load.
▶ Make sure that the product cannot roll away or fall.
▶ Observe the accident prevention regulations applicable in your country.
▶ If devices are provided for the connection of dust extraction and collection facilities, ensure these
are connected and properly used. Use of a vacuum cleaner can reduce dust-related hazards.
▶ This product is not intended for use by persons (including children) with physical, sensory or mental
disabilities or persons lacking the appropriate experience and/or knowledge. These persons must receive
instruction in safe handling of the product and must be supervised throughout their use of the product
by a responsible person.
▶ Children must receive instruction and be supervised to ensure that they do not play with the product.
▶ This product can be used by children 8 years of age or older and by persons with physical, sensory
or mental disabilities or little relevant experience or know-how if they are supervised or have received
instruction on the safe use of the product and the resulting hazards. Do not allow children to play with the
product. Do not allow unsupervised children to clean the device or to carry out user-maintenance tasks.
2.6 Additional safety instructions
▶ Do not use the product if the supply cord and/or the plug is damaged. Make sure that supply cord and
extension cord are not exposed to moisture and/or damp. Do not touch the supply cord if it is damaged
while work is in progress.
▶ Before starting, check all filters and seals and replace damaged filters. Operate the product only with
approved filters (pre-filters and main filters) installed.
▶ Do not allow water to collect in the hollow of the grip. Clean the drain hole at regular intervals.
▶ Whenever the room is occupied, always operate the product at the highest power level.
▶ Make sure that the main-filter frame is securely installed and correctly seated.
▶ Do not use the air filter in the vicinity of flammable and explosive gases.
▶ Make sure that the product is so steady that there is no risk of it tipping over.
▶ Avoid tilting the product while it is in operation. The flow of air from the air discharge can swirl dust off
the floor if the flow of air is directed toward the floor.
▶ Avoid moving the product while it is in operation.
▶ When the product starts up, it produces a strong current of discharged air. This can swirl up dust in the
product's immediate vicinity.
▶ Always switch the product off at the main switch! The start-up capacitor can carry an electrical charge
even after the plug has been disconnected from the power outlet.
▶ Do not use the product to filter hot or incandescent fragments or particles. Make sure that the temperature
of the inducted contaminated air does not exceed 60 °C (140 °F).
▶ Do not permit the product to become overloaded or blocked because of an overfilled filter. As soon as
the indicator light for filter change shows, stop working with the product and change the filters.
▶ To reduce the risk of injury use only genuine Hilti accessories and spare parts or those of equivalent
quality.
▶ Before beginning cleaning and maintenance work, switch the product off and unplug it from the power
outlet. Before you open the filter cover, wait until the turbine has come to a complete stop.
▶ Do not transport the product by crane or with hoists.
▶ Do not stand on the product (do not use it as a substitute for a ladder).
▶ Connect the product only to a properly earthed/grounded power source.
▶ Before you unplug the supply cord of a power tool from the product's electric tool power outlet, always
first disconnect the product from the main electricity supply.
▶ Store the product and its accessories in dry rooms. Keep it out of reach of children.
12 English 2297300
*2297300*