Hilti AIC 1000 Notice D'utilisation Originale page 14

Dealing with recyclable materials
Do not dispose of electric equipment and batteries as household waste
1.2.3 Symbols in illustrations
The following symbols are used in illustrations:
These numbers refer to the illustrations at the beginning of these operating instructions.
The numbering reflects the sequence of operations shown in the illustrations and may deviate
from the steps described in the text.
Item reference numbers are used in the overview illustration and refer to the numbers used in
the key in the product overview section.
These characters are intended to specifically draw your attention to certain points when handling
the product.
1.3 Product-dependent symbols
1.3.1 Symbols on the product
The following symbols can be used on the product:
Transport by crane is not permissible
1.4 Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Air cleaner
Generation
Serial no.
1.5 Declaration of conformity
The manufacturer declares, on his sole responsibility, that the product described here complies with the
applicable legislation and standards. A copy of the declaration of conformity can be found at the end of this
documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | D-86916 Kaufering, Germany
2 Safety
2.1 Essential safety instructions
WARNING! READ AND SAVE THESE INSTRUCTIONS!
Read and follow all safety instructions and other instructions given in this document. Failure to follow all
instructions listed below can result in electric shock, fire and/or serious injury.
2.2 General safety instructions
▶ If the product is used in conjunction with a power tool, read the operating instructions for the
power tool before use and comply with all the instructions and warnings.
▶ Do not tamper with or attempt to make alterations to the product.
10 English
AIC 1000 | AIC 2000
01 / (01)
2297300
*2297300*