bosal Comfort Pro II Notice D'assemblage Et De Sécurité page 56

MOUNTING BICYCLES
ATTENTION!
Personal injury or material damage possible due to loose parts.
Improperly tightened parts on the bicycles can become loose during the
journey.
 Remove all parts not firmly attached to the
bicycle, such as e-bike battery, bicycle pump,
bicycle bag, bicycle crate, bicycle basket, child
seat, bottle or navigation device.
NOTE
In order to improve the driving characteristics of your vehicle, mount the
heavier bicycle first. If carrying only one bicycle, this should be mounted in
the rail closest to the rear of the vehicle.
NOTE
The frame holders are flexible to place on the U-tube, and are also flexible
to place on your bicycle. Try the first time which position in your situation
works best (and most stable affirmative is). It is important to place the
frame holder as high as possible, giving maximum stability.
Bosal Comfort Pro III
Placing the third bicycle
Placing a third bicycle is done as the
first and second bicycle are mounted. In
addition, the third bicycle is connected
to the frame of the middle bicycle by the
short loose frame holder (see step 8).
56