Connecting The Unit To Other Equipment - Sony VID-P150 Mode D'emploi

Preparation

Connecting the Unit to Other Equipment

Notes on connections
• Before making any connections, turn off the power of
the VID-P150 and the equipment to be connected.
Example of connections to this unit
Front
Microphone
Rear
AC outlet
AC power cord (supplied)
AC IN
VID-P150
(Rear panel)
S VIDEO IN 1 or 2
VIDEO IN
1 or 2
Video
a)
DIN 4-pin cable
or
cable
S video
Video
output
output
connector
connector
a) It is recommended that you use the DIN 4-pin cable when
you connect this unit to the equipment with an S video
input or output connector.
12
MIC
AC power cord (not supplied)
VIDEO OUT (phono jack)
AC OUT (NTSC
model only)
AUDIO L, R
1 or 2
Audio cable
AUDIO L and
Audio output
connectors R OUT
Video equipment
• For NTSC model only: Before connecting a device
such as a monitor to the VID-P150 AC OUT
receptacle, check to see if the power consumption is
2.5 A or less. Do not connect any device whose
power consumption is over 2.5 A to the VID-P150.
VID-P150 (Front)
AC inlet
Video input
connector
Video cable
VIDEO OUT 1
Video input
(phono jack)
connector
S VIDEO OUT
S video input
(4-pin DIN) connector
a)
DIN 4-pin cable
or
Video cable
Video input connector
VIDEO OUT 2
(BNC type)
Audio cable
Audio
input connectors
Camera monitor
Color monitor
Projector
Screen
Amplifier
Speaker