ALFRA ROTABEST RB50X Manuel D'utilisation page 17

Maintenance and repair
Maintenance, checks and repairs are only to be made by electronic specialists according to the valid regulations of
the respective country.
Only use genuine ALFRA spare parts.
Spare part list at the end of this operation manual.
The metal core drilling machine Alfra Rotabest should be serviced after appr. 250 hours running time by our Alfra
workshop or appointed dealers. The Gear oil (Lubcon, Turmogearoil PE 150 300ml) should be exchanged as well
as the brushes.
CE Declaration of Conformity
Herewith we
Alfred Raith GmbH
2. Industriestr. 10
68766 Hockenheim
declare that the Metal Core Drilling Machine
ALFRA Rotabest RB50X
corresponds to the following standards:
Machine standard: 2006/42/EG
Low voltage standard: 2006/95/EG
Electro-magnetic compatibility (EMC): 2004/108/EG
Following standards or standard documents were applied:
EMC- standard:
EN 55014-1:2006
EN 55014-2:1997+A1:2001
EN 61000-3-2:2006
EN 61003-3-3:1995+A1:2001+A2:2005
Documentation:
Cornelia Dorn
Hockenheim, 26.11.2012
Markus A. Döring
(Managing Director)
17