NSK Pana-Max2 Serie Mode D'emploi page 7

CAUTION
Read this Operation Manual before use to fully understand the
product functions and file for future reference.
When operating the product always consider the safety of the
patient.
Users are responsible for the operational control, maintenance and
continual inspection of this product.
Do not attempt to disassemble the product nor tamper with the
mechanism except as recommend by NSK in this Operation
Manual.
Do not allow any impact on to the product. Do not drop the product.
Operators and all others in the area must wear eye protection and
a mask when operating this handpiece.
Should the product function abnormally, cease operation
immediately and contact your Authorized NSK Dealer.
Do not use high acid water or sterilizing solutions to wipe, immerse
or clean the product.
The products are delivered in a non-sterile condition and must be
2
autoclaved prior to use.
Perform regular function and maintenance checks.
If the product is not used for a long period check it is functioning
correctly before using on a patient.
To avoid clinical downtime it is recommended that a spare be kept
on hand in case of a breakdown during surgery.
U.S. Federal law restricts this device to sale by or on the order of a
licensed physician.
3. Setting of Air & Water Supply Pressure
Measure the supply pressure at the handpiece / hose connection point
and set the pressure to the value specified on the specification table.
(Fig.1)
For Multi Gauge information refer to Option Parts List.
WARNING