GYS GYSFLASH 51.12 CNT FV Manuel D'utilisation page 22

GYSFLASH 51.12 CNT FV / 101.12 CNT / 103.12 CNT / 121.12 CNT FV /
123.12 CNT FV / 125.12 CNT FV / 101.24 CNT FV / 103.24 CNT FV /
USB CONNECTIVITY
Your GYSFLASH is equipped with USB connectivity that extends its functionality by creating custom configurations on your compu-
ter that can then be downloaded to the device via a simple USB stick. The custom configuration allows you to add, delete or modify
charging modes and profiles, so that your charger can be adapted to your needs.
USB connectivity also gives you the ability to retrieve the history and data of more than 100 recharge on a USB stick and run them
on a spreadsheet.
Navigation :
1 Use the arrows to scroll through the different submenus or files available
2 Press the SELECT button to enter the submenu or select a file.
3 Use the MODE button to return to the previous submenu
Import a new configuration:
This function allows you to download a new configuration («.gfc» file) into the charger via the USB key.
First, make sure that the"".gfc"" file corresponding to the new configuration is present on the USB key.
1
This file must not be located in a folder or subfolder of the USB stick.
2 Connect the USB stick to the charger.
3 Enter the "Import CONFIG" submenu
4 Select the file to download
5 Confirm the download of the file
6 The charger will then download the new configuration.
Export a configuration on a USB key:
This function allows you to save the current charger configuration («.gfc» file) to the USB stick.
1 Connect the USB stick to the charger.
2 Enter the "Export CONFIG" submenu
3 Confirm that the configuration has been saved.
The charger will then save its current configuration on the USB stick.
4
( file ""Config_file.gfc"").
Restore the previous configuration:
This function allows you to restore the second to last charger configuration in case of a problem or error with the last downloaded
configuration.
1 Enter the "Restore CONFIG" submenu
22 22
25.48 CNT FV / 51.48 CNT FV / 53.48 CNT FV
EN
Import CONFIG
Select file
config.gfc
Continue?
Oui
Loading
Export CONFIG
Continue?
YES
Loading
Restore CONFIG