Guarantee Conditions; Declaration Of Conformity - Carrera RC CRC X1 Instructions De Montage Et D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
Wenn der Quadrocopter im Schwebeflug, ohne Bewegung des Hebels für
18
Rechts-/Links-Neigung nach links bzw. rechts fliegt gehen Sie bitte wie
folgt vor: Bewegt sich der Quadrocopter von selbst schnell oder langsam seit-
wärts nach links, drücken Sie den unteren rechten Trimmer für Rechts-/
Links-Neigung schrittweise nach rechts. Wenn sich der Quadrocopter nach
rechts bewegt, drücken Sie den Trimmer Rechts-/Links-Neigung schrittweise
nach links.
Wenn sich der Quadrocopter im Schwebeflug, ohne Bewegung des He-
19
bels für Vor-/Zurück nach vorne bzw. hinten fliegt gehen Sie bitte wie folgt
vor: Bewegt sich der Quadrocopter von selbst schnell oder langsam nach
vorn, drücken Sie den oberen rechten Trimmer für Vor-/Zurück schrittweise
nach unten. Wenn sich der Quadrocopter nach hinten bewegt, drücken Sie
den Trimmer für Vor-/Zurück schrittweise nach oben.
Rückflughilfe
Stellen Sie sicher, dass sich keine Hindernisse in der Flugbahn be-
20
finden und es windstill ist! ACHTUNG das Modell besitzt kein
GPS-System!
Solange dieser Knopf gedrückt wird, fliegt der Quadrocopter wieder zurück in
Richtung des Piloten, unabhängig davon wie er positioniert ist.
ACHTUNG! Funktioniert nur wenn sich der Quadrocopter vor dem Pi-
loten befindet.
Wechsel der Rotorblätter
Verwenden Sie zum abziehen eines Rotorblatts ggf. einen schmalen glat-
21
ten Gegenstand. Achten Sie darauf dass Sie das Rotorblatt vorsichtig
senkrecht nach oben abziehen und dabei den Motor von unten stabilisierend
festhalten.
QR-Code für Motor-Wechsel-System, Ersatzteile und weitere Infor-
22
mationen.
ACHTUNG!
23
Achten Sie unbedingt auf die Markierung und Farbe, sowie den Neigungs-
winkel der Rotorblätter!
Vorne Links: rot – Markierung „B"
Vorne Rechts: rot – Markierung „A"
Hinten Rechts: schwarz – Markierung „B
Hinten Links: schwarz – Markierung „A"
Problemlösungen
Problem: Controller funktioniert nicht.
Ursache: Der ON/OFF-Powerschalter steht auf „OFF".
Lösung: Den ON/OFF-Powerschalter auf „ON" stellen.
Ursache: Die Batterien wurden falsch eingelegt.
Lösung: Überprüfen Sie, ob die Batterien korrekt eingelegt sind.
Ursache: Die Batterien haben nicht mehr genug Energie.
Lösung: Neue Batterien einlegen
Problem: Der Quadrocopter lässt sich mit dem Controller nicht steuern.
Ursache: Der Powerschalter des Controller steht auf „OFF".
Lösung: Zuerst den Powerschalter am Controller auf „ON" stellen.
Ursache: Der Controller ist ggf. nicht richtig mit dem Empfänger im Quadrocop-
ter gebunden.
Lösung: Führen Sie die Bindung wie unter
Problem: Der Quadrocopter steigt nicht auf.
Ursache: Die Rotorblätter bewegen sich zu langsam.
Lösung: Den Gashebel nach oben schieben.
Ursache: Die Akku-Leistung reicht nicht aus.
Lösung: Den Akku aufladen (siehe Kapitel „Aufladen des Akkus").
Problem: Der Quadrocopter verliert ohne ersichtlichen Grund während des
Flugs an Geschwindigkeit und sinkt ab.
Ursache: Der Akku ist zu schwach.
Lösung: Den Akku aufladen (siehe Kap. „Aufladen des Akkus").
Problem: Der Quadrocopter dreht sich nur noch im Kreis oder überschlägt
sich beim Start.
Ursache: Falsch angeordnete oder beschädigte Rotorblätter
Lösung: Rotorblätter wie in
21 22 23
Irrtum und Änderungen vorbehalten · Farben / endgültiges Design – Änderungen vorbehalten
Technische und designbedingte Änderungen vorbehalten · Piktogramme = Symbolfotos
4
beschrieben durch.
beschrieben anbringen/austauschen.
Dear customer
Congratulation! You bought a Carrera RC Quadrocopter which has been ma-
nufactured according to today´s state-of-the-art technology. As it is our cons-
tant endeavour to develop and improve our products, we reserve the right to
make modifications, either of a technical nature or with respect to features,
materials and design, at any time, and without prior notice. For this reason, no
claims will be accepted for any slight deviations in your product from the data
and illustrations contained in these instructions. These operating and assem-
bly instructions are an integral part of the product. Non-observance of these
operating instructions and the safety instructions they contain will render the
guarantee null and void. These instructions are to be kept for future reference
and in the event that the product is passed on to a third party.
For the latest version of these operating instructions and information on
replacement and spare parts available, please visit
service area.
WARNING! Before you first fly the model, find out whether there is a le-
gal requirement to insure model aeroplanes such as this in your country.

Guarantee conditions

Carrera products are technically advanced products (NO TOYS) which
should be handled with care. It is important to follow the directions given
in the operating instructions. All components have been subjected to
careful inspection (technical modifications and alterations to the model
for the purpose of product improvement are reserved).
Should any faults nevertheless occur, guarantee is assumed within the
scope of the following conditions:
In accordance with the following provisions, Stadlbauer Marketing + Vertrieb
GmbH (hereinafter referred to as "manufacturer") warrants to the endconsum-
er (hereinafter referred to as "customer") that the Carrera RC-model-Quadro-
copter (hereinafter referred to as "product") delivered to the customer shall be
free from defects in material or workmanship for two years from the date of
purchase (guarantee period). Such defects will, at the manufacturer´s option,
either be repaired by the manufacturer or fixed by delivering new or refur-
bished parts free of charge. The warranty does not cover failure due to normal
wear and tear, (e.g. to batteries, rotor blades, cabin covering, gear wheels
etc.), or damage as a result of improper handling/misuse or unauthorised in-
terference. Any other customer´s claims asserted against the manufacturer,
especially action for damages, shall be excluded.
The contractual and statutory rights of the customer against the seller (supple-
mentary performance, rescission of the contract, abatement, compensation)
which exist with the product not having been free from defects at the time of
the passing of risk, shall remain unaffected by this warranty.
Claims from this special warranty shall only be valid if:
• the defect reported has not arisen by damage caused by unintended use or
misuse as specified in the instruction manual,
• the failure of the product is not due to normal wear and tear
• the product does not show any signs resulting from repairs or other interferenc-
es carried out by workshops not having been authorised by the manufacturer,
• the product has only been operated with accessories authorised by the man-
ufacturer.
Guarantee cards cannot be replaced.
Note for EU countries: Reference is hereby made to the seller's statutory
guarantee obligation, to the extent that this guarantee obligation is not restrict-
ed by the product guarantee.

Declaration of conformity

Stadlbauer Marketing + Vertrieb GmbH hereby declares that this model in-
cluding the controller conforms with the fundamental requirements of the
following EC directives: EC Directives 2009/48 and 2004/108/EC regarding
electromagnetic compatibility and the other relevant regulations of Directive
2014/53/EU (RED).
The original declaration of conformity can be requested from carrera-rc.com.
Maximum radio-frequency power transmitted <10 dBm
Frequency range: 2400 – 2483.5 MHz
5
ENGLISH
carrera-rc.com
in the

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Police

Table des Matières