Executing The Slide Show Promptly - Sony Memory Stick VPL-CX3 Mode D'emploi

7
Select "Slide Show", then press the ENTER key.
8
Select "Execute", then press the ENTER key.
To execute the slide show
When the slide show setting is set to "Auto" by the Projector Station for
Presentation, the slide show starts automatically. When you want to end the
slide show, press the MS SLIDE or ENTER key. When it is set to "Manual",
press the following keys for the slide show.
,/m: to display the next slide
</M: to display the previous slide
MS SLIDE/ENTER: to end the slide show
To return to the MS home before executing the slide show
Select "Return".

Executing the Slide Show Promptly

As the settings are memorized even if you change the input after the setting
of steps 1 to 6, press the MS SLIDE key on the Remote Commander just as
you start the presentation. The input is changed to MS and the slide show
starts promptly. To end the slide show, press the MS SLIDE or ENTER key
again.
EVENT
Select: Presentation Viewer
Slide Show
Index
Select Contents
Sliding Material for a Presentation — Presentation Viewer
Execute
Return
13
GB