Stubborn Stains On Enamel; Stubborn Stains On Stainless Steel; Cleaning The Pan Support; Brass Wok Burner Parts - Asko Hg1654s Mode D'emploi

Assemble the burner parts using the guide ridges.
Wok burner
1. Burner cap outer ring
2. External torch head
3. Internal lid and torch head
4. Gas base
5. Burner base
6. Sparkplug
7. Thermocouple
Simmer-, semi-rapid and rapid burner
1. Burner head
2. Burner base
3. Sparkplug
4. Thermocouple

Stubborn stains on enamel

• Remove with a non-abrasive cream. Never use
scouring powder, scouring pads, sharp objects or
aggressive cleansing agents.

Stubborn stains on stainless steel

• If spilled, acid fl uids and sugary foodstuff s like red
cabbage, beetroot, soy sauce, applesauce and
rhubarb may cause the surface to discolour. Stubborn
stains on stainless steel are best removed with a
cleaning agent for stainless steel. Always polish in the
direction of the steel structure to avoid shine spots.
(This kind of damage is not covered by the warranty!)
• If the above methods do not remove the stains, clean
the plate with a special cleaning agent for stainless
steel. Remember to treat the entire drip tray in order
to avoid discolouring. Also, as a follow-up treat the
drip tray with a polish or maintenance agent for
stainless steel. Please note that over the years the
surface will slightly discolour.

Cleaning the pan support

• The enamel on the pan supports is suitable for
cleaning by dishwasher. However, the connection
with the rubber feet is not. Therefore do not clean the
pan supports in the dishwasher. Moreover, the pan
supports might show some discoloration if they were
washed in the dishwasher. If the rubber feet are lost,
the pan support is likely to damage the drip tray.

Brass wok burner parts

• A few parts of the work burner are made from brass.
It is normal for the colour of the brass to change as
a result of the high temperatures that occur when
cooking with a wok.

Cleaning removable burner components

• The removable burner components (including wok)
are best cleaned with a mild cleaning product and a
soft cloth. In the case of obstinate stains you can soak
the parts in hot suds.
• Burner parts should not be cleaned in the dishwasher.
The parts may be damaged by the dishwasher
detergent!
• Never use scouring powder, scouring pads, sharp
objects or aggressive cleansing agents.
11