CDVI UCA3 Manuel D'installation page 15

INSTALLATION MANUAL
UCA3
3-Door standalone controller (Radio/Proximity)
USING RF TAGS
- Radio frequency tags are used in the same manner.
- When a non-programmed tag is presented :
- When a tag is recognized but has not been presented on the correct reader, the tag's programmed user
number is displayed but without the dot indicating the current door.
EXAMPLE OF A PROXIMITY TAG REGISTERED AS USER NUMBER 278
EXAMPLE OF A TAG WHICH HAS NOT BEEN PROGRAMMED ON THE CENTRAL UNIT.
M - TO RESET THE CENTRAL UNIT AND ERASE THE MASTER TAG
TO ERASE THE MASTER TAG :
- Disconnect the central unit from the power supply.
the display indicates
WITH ACCESS GRANTED TO DOOR 2.
The display indicates
EXAMPLE OF AN RF TAG REGISTERED AS USER NUMBER 003
WITH ACCESS GRANTED TO DOORS 1 AND 3.
The display indicates
EXAMPLE OF A PROXIMITY MASTER TAG
The display indicates
The display indicates
EN
cdvi.com
15
cdvigroup.com