CDVI UCA3 Manuel D'installation page 12

INSTALLATION MANUAL
UCA3
3-Door standalone controller (Radio/Proximity)
H - PROGRAMMING TIME DELAYS
Time delays can be programmed (from 01 to 99 seconds). When the time delay is programmed as 00,
the door relay functions in bistable mode (no time delay, functions as a remote controlled switch). In this
mode, if the power supply is cut off, the door relay will be deactivated. When the power supply is back to
normal, the relay will revert back to its state prior to the power cut.
- Open the menu 2 :
- Using the Next Previous
- Press the Enter key to validate.
- Using the Next Previous
- Press the Enter key to validate
- Using the Next Previous
- Press the Enter key
- The display is off, indicating that the time delay settings are complete.
cdvi.com
12
cdvigroup.com
:
The display indicates :
"1." Door number
"01" Current time delay
This display indicates that the door 1 relay
will be activated for 1 second.
menu keys, select the required time delay.
.
The display indicates :
This display indicates that the door 2 relay
will be activated for 1 second.
menu keys, select the required time delay.
.
The display indicates :
This display indicates that the door 3 relay
will be activated for 1 second.
menu keys, select the required time delay.
to validate.
EN