CDVI UCA3 Manuel D'installation page 14

INSTALLATION MANUAL
UCA3
3-Door standalone controller (Radio/Proximity)
- The display indicates that a master tag is programmed,
- Press the Next key.
- Press the Enter key to delete the master tag.
- The display indicates that the master tag has been deleted. The display is off and the LED is fl ashing
K - TAG IDENTIFICATION
- The role of this menu is to identify tags with their user numbers and door access details.
- To identify a badge, open the menu 5
- The display must be off and the green LED on menu 5 must be lit and steady.
- Present a tag in front of the enrolment reader or press one of the two keys on an RF tag.
- When badge identifi cation is completed, press the PROG
USING PROXIMITY TAGS
- When a tag is presented in front of a reader, the display indicates the user number the tag
is programmed on as well as the door the tag is presented at.
- The green LED remains lit up and steady throughout the door opening process (for readers fi tted
with LEDs).
- The display goes off after one second.
cdvi.com
14
cdvigroup.com
The display indicates
The display indicates
.
key twice to exit the programming mode.
PROG
EN
.