CDVI UCA3 Manuel D'installation page 16

INSTALLATION MANUAL
UCA3
3-Door standalone controller (Radio/Proximity)
- Press the four buttons below the display.
- While continuing to press the buttons, switch the central unit back on.
- When the display goes off, release the four buttons, the master badge is now erased.
TO RESET THE CENTRAL UNIT :
- Follow the same procedure, but keep the four buttons pressed down.
- When the display goes off, release the four buttons, the central unit memory is now cleared
(back to factory settings).
7] BADGE ASSIGNMENT TABLE
USER N° NAME
cdvi.com
16
cdvigroup.com
The display indicates
The display indicates
TAGS
MASTER PROX RF NUMBER
EN
DOORS
1 2 3