Frequency Measurement - VOLTCRAFT VC-5081 Mode D'emploi

h) Frequency measurement
Never exceed the maximum permissible input value of 10V/AC.
The multimeter can measure frequencies from 0 Hz to 25 kHz in a voltage range of 2.5 to 10 V/AC.
Proceed as follows to conduct a measurement:
- Turn the rotary switch to the measuring range "kHz".
- Connect the black test lead to the COM socket (6) and the red test lead to the Hz
socket (7).
- Zero the multimeter using the adjustment screw (3).
- Make sure that the "Vrms/Vp-p" button (9) is not pressed.
- Connect both test leads to the measuring object (generator, circuit, etc.).
- Read the measured value from the "kHz" scale. The unit corresponds to the selected measuring range (kHz).
- After measurement, turn the rotary switch to position "OFF" to turn off the multimeter.
40