Publicité
Sweeping performance not satisfactory
Correctly set the sweeping pattern of the roller brush and side
brush with the adjustment device.
Roller brush and side brush are too worn, replace them.
Check the sealing strips for wear, adjust or replace them if nec-
essary.
Accessories / spare parts
The following is an overview (excerpts thereof) of wear parts or
optionally available accessories.
Accessories
Description
Side brush
For interior textile coverings 5.032-221.0
Roller brush
For interior textile coverings 4.762-642.0
Dust filter
Flat fold filter (PTFE)
Pre-filter
Dust bag
10 dust bags in a set
Replacement battery,
High performance recharge-
"Battery Power+ 36/
able battery 36 V, 7.5 Ah
75 DW"
Charger, "Battery
Quick charger, 36 V *EU
Power+"
Technical data
Device performance data
Operation duration with fully loaded bat-
tery
Working width
Working width with 1 side brushes
Theoretical surface performance
Surface performance (max)
Battery
Battery type
Battery capacity
Working voltage of the battery
Ambient conditions
Ambient temperature
Humidity, non-condensing
Dimensions and weights
Length
Width
Height
Net weight (transport weight)
Approved total weight
Width of roller brush
Diameter of roller brush
Diameter of side brush
Waste container
Waste container volume
Filter and suction system
Filter system
Filter area
Dust class
Determined values in acc. with EN 60335-2-72
Hand-arm vibration value
Sound pressure level L
pA
Uncertainty K
pA
Sound power level L
+ K uncertainty
WA
WA
Uncertainty K
WA
Subject to technical modifications.
Order no.
6.907-449.0
5.745-280.0
2.884-358.0
2.445-043.0
2.445-045.0
Minutes
Up to 60
mm
450
mm
625
2
m
/h
2500
Lithium-
ion
Ah
7,5
V
36
°C
0 bis +40
%
0 - 90
mm
980
mm
675
mm
1070
kg
39
kg
54
mm
450
mm
230
mm
250
l (kg)
20 (15)
Flat fold
filter
2
m
0,95
M
2
m/s
< 2,5
dB(A)
56
dB(A)
2
dB(A)
72
-
dB(A)
2
English
Declaration of Conformity
EU- Declaration of Conformity
We hereby declare that the machine described below complies
with the relevant basic safety and health requirements in the EU
Directives, both in its basic design and construction as well as in
the version placed in circulation by us. This declaration is invali-
dated by any changes made to the machine that are not ap-
proved by us.
Product: Sweeper vacuum
Type: 1.517-300.0 | 1.517-301.0
Currently applicable EU Directives
2006/42/EC (+2009/127/EC)
2014/30/EU
2000/14/EC
2011/65/EU
Harmonised standards used
EN 60335-1
EN 60335-2-29
EN 60335-2-72
EN 62233: 2008
EN 55014-1: 2017 + A11: 2020
EN 55014-2: 2015
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN 61000-6-2: 2005
EN IEC 63000: 2018
Applied conformity evaluation method
2000/14/EG: Annex V
Sound power level dB(A)
Measured: 70
Guaranteed: 72
The signatories act on behalf of and with the authority of the com-
pany management.
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2020/12/01
Declaration of Conformity (UK)
We hereby declare that the product described below complies
with the relevant provisions of the following UK Regulations, both
in its basic design and construction as well as in the version put
into circulation by us. This declaration shall cease to be valid if
the product is modified without our prior approval.
Product: Sweeper vacuum
Type: 1.517-300.0 | 1.517-301.0
Currently applicable UK Regulations
S.I. 2008/1597 (as amended)
S.I. 2016/1091 (as amended)
S.I. 2001/1701 (as amended)
S.I. 2012/3032 (as amended)
Designated standards used
EN 60335-1
EN 60335-2-29
EN 60335-2-72
EN 62233: 2008
EN 55014-1: 2017 + A11: 2020
17
Publicité
