®
2.
It is recommended that the sock installation
be completed with two people. The sock and
frame are non-handed until sock is installed.
NOTE: When starting the sock onto the
frame, the sock's back panel must be on the
installers right, as shown, to ensure that
the sock is correctly mounted onto the
frame.
3.
Work fabric sock onto and around
frame. Keep both ends relatively even
as you install.
NOTE: Confirm correct installation of
the sock, by making sure that the end of
the fabric on the back panel hem is on
the inside of the back panel.
NOTE: Refer to step 8 to install back panel
rod into the hem after the Hoodie is mounted
to the lounge.
2
BACK PANEL
END OF THE FABRIC
BACK PANEL HEM
3
Page 3 of 17
P/N 939500562
Doc # 69805 Rev J