Steelcase Bivi Instructions De Montage page 14

®
Install Hoodie on Bivi Lounge
(without exposed attachment)
10.
Refer to the drawing above and
measure to find the approximate
location of the pre-drilled holes under
the fabric.
Locate Holes
11.
Use your fingertip to locate holes
under fabric and padding.
Confirm and Indicate Holes
12.
Use a pin to confirm hole locations.
Use the sides of the hole as a guide to
cut a small slit in the fabric and padding.
Keep the slit smaller than the base of
the connector.
NOTE:
Return to step 4 of Hoodie
assembly instructions to finish the
assembly.
11
10
19.75
4.25
1.20
12
Page 14 of 17
P/N 939500562
Doc # 69805 Rev J