Shutdown
1.
Make sure the power switch is in the OFF position.
2.
Unplug the power cord from the outlet.
3.
Turn regulator knob counter-clockwise until the output pressure
gauge reads 0 PSI.
4.
Remove the attached hose and accessory.
5.
Drain all air and water from the air tank.
6.
Once the tank is fully drained, close the drain valve.
7.
Store in a safe, dry, non-freezing area.
Storage
Do not store the compressor in areas that are humid and/or subject to
temperature fluctuations. This may result in excess moisture or water
forming in the tank, which may affect the compressors cycle times.
1.
Do not store in areas with excessive dust.
2.
After the power switch is in the OFF position, unplug and
properly store the power cord in a protected and safe position.
17