Installing Rack-Mounting Adapters; Using Rack-Mounting Adapters As A Stand - Korg Pitchblack X Pro EFGSJ 1 Manuel Du Propriétaire

Installing rack-mounting adapters

By installing the included rack-mounting adapters, the tuner can be attached to an EIA standard rack
or case, etc., with the appropriate rack screws.
NOTE: There is no difference between the left and right rack-mounting adapters.
Installation
Align the rack-mounting adapters with the mounting slots on the
tuner, and then slide in the adapters from the back. Securely install
the adapters so that they lock into place and will not slip out.
If the tuner is attached to the rack without sufficiently installing
the adapters, the tuner may fall and become damaged.
Removal
Release the lock on the back of the tuner, and then slide out the adapter to
remove it.
Rack-mounting holes
Use these holes to attach the tuner to an EIA standard rack or case with the
included screws.

Using rack-mounting adapters as a stand

By installing the rack-mounting adapters in the mounting slots on the bottom of the tuner, it can be
positioned at an easy-to-read angle when it is placed on a table.
En-8