Meter Display Color Settings; Cable Check Function - Korg Pitchblack X Pro EFGSJ 1 Manuel Du Propriétaire

Meter display color settings

You can specify the color of the meter display. There are five color combinations to choose from.
1. Long-press the DISPLAY button.
The POWER ON LED will blink, and the color number appears in the note display.
2. While the POWER ON LED is blinking, press the DISPLAY button to select the color.
3. Once you've made the setting, wait for about two seconds without pressing any buttons.
The meter display color setting will be made, and you can now use the tuner normally.

Cable check function

When the cable is connected, the cable check function will start and the results will be shown on the
CABLE CHECK LEDs.
NOTE: Cable checking can only be done with mono cables. Stereo cables cannot be checked.
CABLE CHECK
Normal: Abnormal:
En-7
INPUT 1