Rösle 16283 Mode D'emploi page 42

7. Timer function
7.1. Starting Timer
To use the Timer function of the digital thermometer press button No. 5.
The timer display mode will be activated as shown in illustration 5.
Use the setting dial to choose the time setting for hours, minutes and seconds
and confirm each setting by pressing the Set button.
Maximum countdown: 9 hours, 59 minutes and 59 seconds.
When countdown has terminated, an acoustic signal will be activated. To stop the
signal press the Set button. The timing display will continue to run for 30 minutes
after completion of countdown. After interruption of the original signal no further
acoustic signal will be given during this time span. After 30 minutes and stopping
of the timer function, a prolonged acoustic signal will be emitted.
Timer and thermometer can be operated simultaneously.