Publicité
Les langues disponibles
Les langues disponibles
Sensor self-learning sequence
NOVA
Neo Sensor wall mounted
Available on references :
Available on references :
57036, 57040
55375, 55383, 55385, 55387, 55391, 55377, 55379, 55381,
55389, 55393, 55395
Operating mode:
Install black adhesive tape on sensor for 12 seconds: 2 flushes when tape is detected, 1 flush after 10 second. It means you
can remove adhesive.
Remove tape and don't put hands in front of the sensor during flushing time.
Calibration for 10 seconds: 10s flushing to learn its environment.
Calibration finished.
Important: self-learning must be done with using environment (lighting, cleaned sink...). In case of the environment
modification please restart self-learning sequence.
In case of other problem, please contact our technical assistance..
Parameters modification
(distance of detection, delay, sensibility) with not provided
communication box
Via Prestocom
http://www.prestodatashare.com/documentation/pdfs/Q5347.pdf
4
Publicité
