DISMOUNTING
a) Select a level surface, set parking brake, stop the
engine, and remove the ignition key to prevent
accidental starting.
b) Straighten the broom perpendicular with the
vehicle.
c) Set the parking stands in their most extended
position Make sure the brush bristles never touch
the ground.
d) Lower the broom to the ground.
e) Unhook the turnbuckles from the front of the
vehicle, the hook from the winch and the hitch
from the rear of the vehicle.
f) Remove the control box (item 1) from the support
(item 2). Disconnect the wires (item 3) and place
the box on the accessory.
g) Remove the vehicle.
MAINTENANCE & DISMOUNTING
END OF SEASON STORAGE
a) Clean the broom and inside of the hood and paint
all the parts where the paint has worn off.
b) Take note of the replacement parts needed for
next season.
c) Lubricate all grease fittings and all moving parts.
d) Store broom on parking stands. Make sure the
brush bristles never touch the ground.
e) If brush bristles are exposed to direct sunlight,
protect the bristles with a tarp.
f) Store the broom in a dry place.
16