R&G SP0032 Instructions De Montage page 2



FITTING INSTRUCTIONS

PLACE THE SPINDLE BAR (ITEM 1) INTO THE THREADED SPACER (ITEM 6);
PLEASE ENSURE THE THREADS ARE FULLY ENGAGED. IT IS A GOOD IDEA TO
USE A SMALL AMOUNT OF SEMI-PERMANENT THREAD LOCK TO SECURE IN
PLACE.

PLACE THE ASSEMBLY THROUGH THE REAR SPINDLE FROM THE LEFT HAND
SIDE SO THE SPACER LOCATES INTO THE REAR WHEEL SPINDLE AS SHOWN IN
THE TOP LEFT PICTURE.

PLACE THE LARGER SPACER (ITEM 5) OVER THE EXPOSED END OF THE
SPINDLE BAR (AS SHOWN IN TOP RIGHT PICTURE).

PLACE THE CRASH PROTECTOR (ITEM 4) OVER THE EXPOSED END OF THE
SPINDLE BAR (AS SHOWN IN TOP RIGHT PICTURE).

USE THE NUT AND WASHER (ITEMS 2 AND 3) AND SECURE IN PLACE. DO NOT
OVER-TIGHTEN—THE NYLOC NUT WILL HOLD IT TIGHT.
TOOLS REQUIRED
SOCKET SET TO INCLUDE 13 AND 21mm SOCKETS
SMALL AMOUNT OF SEMI-PERMANENT THREAD LOCK.