Possible Problems And Solutions - Oursson AM6244 Manuel D'instructions

• Display «READY», indicator «CLEANING» isn't flashing,
press .
• Display will show «CLEANING».
READY
CLEANING
Cleaning the brewing unit
• After a long-term use, there will be some coffee bean
powder left on the brewing unit. Remove the left powder
by clean the brewing unit.
• To clean the brewing unit use only pills specially
purposed for this. Before cleaning, make sure
that you are using detergent that suits your coffee
machine.
• Do not interrupt the cleaning process or it may
cause damage to your coffee machine. Wait for
the cleaning process to complete.
Protect your eyes and skin from contact with
the detergent. In case of contact with skin
or eyes - immediately rinse them with clean
water.
• Enter service menu.
• Using find cleaning brewing unit menu, display will
say «CLEAN BREWING UNIT» and press
.
• Display will say «CLEANING»
• O pen powder coffee container add pill, close
the container and press .
• Display will say «CLEAN BREWING UNIT», press
• Cleaning process is active; display will say
«CLEANING...»
• Cleaning process is complete, display will say «READY».
Dry the water from the tray and clean the container for
grounds.
1 5
CLOSE COVER
PRESS RINSE
MAINTENANCE
2 6
CLEAN BREW UNIT CLEAN BREW UNIT
7
3
CLEANING
CLEANING
8
4
OPEN COVER ADD
CLEANING TABLET
READY
Cleaning the milk frother
• After long use of the coffee machine it is necessary clean
the milk frother.
• Enter service menu.
• Using find cleaning brewing unit menu, display will
say «RINSE MILK UNIT» and press .
• Remove the milk pipe from the container with milk. Insert
the end of the pipe into the tray opening, press
• Cleaning process is active, display will say «CLEANING»
24
• Cleaning process is complete, display will say «READY».
Dry the water from the tray and clean the container for
grounds.
1 4
MAINTENANCE
RINSE MILK UNIT
2 5
RINSE MILK UNIT
3
REMOVE MILK PIPE
Descaling the coffee machine, Рiс. D-1
• The daily usage will cause calcareous deposited in coffee
machine. The depositing rate vary with the local water
hardness.
• To descale the coffee machine use special
detergent.
• Enter service menu.
• Using find descale menu, display will say
«DESCALE» and press .
• Fill the water tank with water to MAX and dissolve in it a
special descaling detergent, display will say «SOLVENT
IN TANK».
• Place under the spout a container no less than 1L
capacity, press .
• Cleaning process is active; display will say
«DECALCIFYING...». Follow the instructions on display.
• Add water into the tank after first cleaning cycle, display
will say «FILL WATER TANK». Press
.
• Cleaning process is complete, display will say «READY».
Dry the water from the tray and clean the container for
grounds.
1
MAINTENANCE
2
DESCALE
3
30 MINS
PRESS RINSE
4
SOLVENT IN TANK
5
DECALCIFYING
Cleaning the coffee grounds container and the drip
tray, Рiс. D-2
• Each time after cleaning, wash the drip tray and
grounds container with clean water, wipe dry, wipe
dry additionally 2 metal plates on the tray
• Coffee grounds container capacity is 15 cups. It will
automatically indicate «EMPTY GROUNDS» when it is
full.
.
• Remove drip tray, clean the grounds container, display
will say «INSTALL TRAY».
1
EMPTY GROUNDS
• Each time after cleaning, wash the drip tray and grounds
container with clean water, wipe dry, wipe dry additionally
2 metal plates on the tray.
• If the drip tray is full, the machine will automatically
prompt «EMPTY TRAY».
• Remove drip tray, clean it, display will say «INSTALL
READY
TRAY».
• Install the tray, display will say «READY».
1
EMPTY TRAY
Cleaning other parts of the coffee machine
Before cleaning the interior of the coffee
machine, power it off, and pull out plug. Never
immerse the coffee machine in water. There
will be a risk of electric shock.

POSSIBLE PROBLEMS AND SOLUTIONS

Causes
.
If the water drip tray is full, any function of
making beverage will be out of service.
6
If the coffee grounds container is full, any
function of making beverage will be out of
EMPTY TRAY
service.
7
If water in the water tank is used up, any
INSTALL TRAY
function of making beverage will be out of
service.
8
FILL WATER TANK If coffee beans in the bean container are used
up, function of making coffee will be out of
9
service.
DECALCIFYING
10
Making beverages is not available
READY
The drip tray is not installed correctly; any
function is out of service.
The water in the pipe inside the machine is not
enough; any function is out of service.
• Regularly check the coffee machine whether there is
3
2
excessive coffee bean powder precipitate inside the
machine. You can use a brush to remove the coffee
INSTALL TRAY READY
precipitate.
• Use a dry and soft rag to wipe the touch panel of the
machine. As the touch panel is made of glass, please do
not hit it to avoid the risk of electric shock once the glass
broken
Cleaning the water tank, Pic D-3. Wash water tank in
warm water.
Cleaning the milk frother, Pic D-4. Remove the milk
frother. Disassemble the frother according to picture. Wash
in warm water. Assemble it and install to its place.
3
2
Cleaning the bean container, Pic D-5. Clean the
INSTALL TRAY
READY
container with a dry sponge or paper.
Cleaning the milk pipe, Pic D-6. Clean the milk pipe every
day. Carefully remove the pipe from the frother. Wash in
warm water.
• Thoroughly dry all parts.
Cleaning the spout, Pic D-7. Clean the spout every day
with a damp soft cloth. Make sure there is no plaque
around the spout.
Solutions
Clean the drip tray
Clean the grounds container
Fill the water tank
Fill the coffee beans container
Add one spoon of powder into
the container
Install the drip tray correctly.
Press to top up the system
with water
Display
EMPTY TRAY
EMPTY GROUNDS
FILL WATER TANK
FILL BEANS
LACK OF POWDER
INSTALL TRAY
UNIT EMPTY
25