4.
Maintenance and
Disposal
This chapter provides information about how to draw up a mainte-
nance schedule, and the disposal of Dynamos.
4.1 -
Maintenance
The automation must be subjected to maintenance work on a regular
basis in order to guarantee it lasts.
The maintenance operations must be performed in strict compli-
ance with the safety directions provided in this manual and according
to the applicable legislation and standards.
If any other devices are present, follow the directions provided in their
maintenance schedules.
01. Dynamos requires scheduled maintenance work within at least
within 6 months or 30,000 manoeuvres (max.) from the previous
maintenance.
02. Disconnect the power supply.
03. Check for any deterioration in automation system components,
paying special attention to erosion or oxidation of the structural parts.
Replace any parts which are below the required standard.
04. Check the wear and tear on the moving parts: pinion, rack and
the gate components; if necessary replace them.
05. Reconnect the power supply.
6.
Technical Characteristics
Power supply (VAC 50/60 Hz)
Type of electric motor
Power draw (A)
Speed (m/s)
Force (N)
Cycles (cycles/hour)
IP protection rating
Operating temperature (°C Min/Max)
Dimensions (mm)
Weight of motor (kg)
8
5.
Disposal of the
product
This product is an integral part of the automation and must be
scrapped with it.
At the end of the product's service life, it must be scrapped by quali-
fied staff.
This product is made up of a variety of materials, some of which can
be recycled while others must be disposed of. Check that regulatory
recycling and scrapping facilities are available locally.
Caution! – some parts of the product may contain polluting or haz-
ardous substances which, if dumped into the environment constitute
serious environmental and health risks.
As indicated by the symbol the product may not be disposed of as
domestic waste.
Sort the materials for disposal according to the meth-
ods envisaged by current local legislation; or return the
product to the retailer when purchasing a new one.
Caution! – local legislation may envisage serious fines
in the event of abusive disposal of this product.
DYNAMOS24/1800
230
24 Vdc
2
0.28
1120
60
44
-20° ÷ +50°
400 x 255 x 390 h
18
DYNAMOS2500
230
230 VAC
3.8
0.17
1390
42
44
-20° ÷ +50°
400 x 255 x 390 h
23.5