Shop-Vac BP Serie Manuel D'utilisation page 7

INSTALLING BACK PLATE AND HARNESS ASSEMBLY
1. Install back plate and harness assembly on tank by aligning
curved end of plastic back plate with ledge on back of tank.
2. Secure bottom of back plate to bottom of tank with screws
provided.
3. Secure top of back plate to top of tank with screws provided.
ASSEMBLY (CONT'D.)
BACK PLATE
TAB
CURVE
LEDGE
CURVE
SCREWS
TOP OF
BACKPLATE
TOP
CURVE
SCREWS
ShOULDER
STRAP
PAGE 7