Publicité
INSTALLATION INSTRUCTIONS
REMOVE MUFFLER(S).
1. UNBOLT MUFFLER(S) FROM EXHAUST PIPES WITH 14MM OPEN END WRENCH AND 14MM SOCKET.
2. DISCARD THE EXHAUST GASKET AND LOCK NUTS.
3. REMOVE MUFFLERS BY FIRST DISENGAGING THE REAR EXHAUST HANGER AND THEN THE FRONT.
4. SET MUFFLERS OUT OF THE WAY FOR RE-INSTALLATION.
5. REMOVE FOUR HEAT SHIELD BOLTS AND HEAT SHIELD (BOTH SIDES) RETAIN FOR RE-INSTALLATION.
6. REMOVE RUBBER PLUGS AND DISCARD.
REMOVE
BOLTS
PART NUMBER
L101SAJ001
PRINTED IN MEXICO
ISSUE
DATE
01
03/25/13
PART NUMBER L101SAJ001
DESCRIPTION: SUBARU OUTBACK
(IF EQUIPPED)
SUBARU OF AMERICA
RUBBER
PLUGS
PAGE
5 OF 9
38014N REV G
Publicité
