Publicité
INSTALLATION INSTRUCTIONS
REMOVE BUMPER FASCIA.
1. IT IS RECOMMENDED TO MASK THE SHEET METAL ABOVE THE BUMPER WITH TAPE TO PREVENT
SCRATCHES DURING REMOVAL AND REINSTALLATION OF BUMPER FASCIA.
APPLY TAPE ON SHEET METAL
ALONG EDGE OF BUMPER FASCIA.
LOCATION OF PUSH
PIN IN WHEEL WELL.
2. WITH A FLAT HEAD SCREWDRIVER, REMOVE PUSH PIN FROM INSIDE THE WHEEL WELL (BOTH SIDES).
3. WITH A FLAT HEAD SCREWDRIVER, REMOVE 5 PUSH PINS FROM THE BOTTOM OF BUMPER FASCIA.
PASSENGER SIDE OF BUMPER FASCIA
PUSH PIN.
PART NUMBER
L101SAJ001
PRINTED IN MEXICO
PUSH PIN.
3 PUSH PINS
ISSUE
DATE
01
03/25/13
PART NUMBER L101SAJ001
DESCRIPTION: SUBARU OUTBACK
SUBARU OF AMERICA
DRIVERS SIDE OF BUMPER FASCIA
PUSH PIN.
PAGE
3 OF 9
38014N REV G
Publicité
