STERWINS UP40 Notice De Montage, Utilisation Et Entretien page 194

FR
2.8 ADDITIONNAL LAWN MOWER WARNINGS
• Stop the machine and wait blade(s) to
stop if the product has to be tilted (for
transportation when crossing surfaces
ES
other than grass, when transporting the
machine to and from the area to be used)
• Always carry the product by its handle.
PT
• Do not tilt the machine when
switching on the motor.
• Do not start the machine when standing
IT
in front of the discharge opening.
• Do not put hands or feet near or
under rotating parts. Keep clear of the
discharge opening at all times.
EL
• Use of hearing protection reduces
the ability to hear warnings (shouts or
alarms). The operator must pay extra
PL
attention to what is going on in the
work area. Do not get distracted, and
always concentrate on the task.
• Operating similar tools nearby
RU
increases both the risk of hearing
injury and the potential for other
persons to enter your work area.
KZ
2.9 VIBRATION AND NOISE REDUCTION
To reduce the impact of noise and vibration emission, limit the operating time, use low-vibration
and low-noise operating modes, and wear personal protective equipment. Take the following
UA
points into account to minimise the vibration and noise exposure risks:
1. Only use the product as intended by its design and these instructions.
2. Ensure that the product is in good condition and well maintained.
3. Use correct attachments for the product and ensure they are in good condition.
RO
4. Keep tight grip on the handles/grip surface.
5. Maintain this product in accordance with these instructions and keep it well lubricated
(where appropriate).
6. Plan your work schedule to spread any high vibration tool use across a longer period of time.
EN
2.10 RESIDUAL RISKS
Even if you are operating this product in accordance with all the safety
requirements, potential risks of injury and damage remain. The following dangers
can arise in connection with the structure and design of this product:
→ Health defects resulting from vibration emission if the product is being used over
long periods of time or not adequately managed and properly maintained.
→ Injuries and damage to property due to broken cutting attachments
or the sudden impact of hidden objects during use.
• WARNING: In some countries regulations
define at what time of the day and on
what special days products are allowed to
be used and what restrictions apply! Ask
your community for detailed information
and observe the regulations in order to
preserve a peaceful neighbourhood and
avoid committing administrative offences!
• Operating hours Only operate the product
at reasonable hours - not early in the
morning, late at night or on weekends/public
holidays when people might be disturbed.
Inform yourself about local restrictions.
• During any type of adjustment of the
machine, be careful of not pinching
your fingers between moving cutting
means and fixed parts of the machine;
wearing protective gloves can help to
prevent entrapment of the fingers.
• During any type of servicing of the
machine, please be aware that even
though the power source is switched off,
the cutting means can still be moved.
194