Ductless Recirculation; Recirculating Kit Installation - Zephyr Roma Groove ZRG-E30BS Guide D'utilisation, D'entretien Et D'installation

C O R E
Installation Instructions
R O M A G R O O V E
WA L L

Ductless Recirculation

Ductless recirculation is intended for applications where an exhaust duct work is not possible to be
installed. When converted, the hood functions as a recirculating hood rather than an exhaust hood.
Fumes and exhaust from cooking are drawn and filtered by a set of optional charcoal filters. The air is
then purified and re-circulated back within the home.
We recommend to ALWAYS exhaust air outside of the home by employing existing or installing new
duct work, if possible. The hood is most effective and efficient as an exhaust hood. Only when the
exhaust option is not possible should you recourse to converting the hood into a recirculating hood.
When converted to be a recirculating hood, a set of charcoal filters are required on top of its standard
Metal Filter set. Order according to its part number below. The standard mesh filters are intended to
capture residue from cooking, and the optional charcoal filters help to purify fumes exhausted from
cooking for recirculation.
Recirculating Kit Installation (required if no ducting is used)
For detailed installation instructions, please refer to the manual included with the recirculating kit.
The kit includes the charcoal filters and the air diverter plate.
Charcoal Filter
Recirculating Kit Filters in Quantity to
Hood Model Replacement Part
Part Number Package Order
Number
ZRG ZRC-00RG 2 Z0F-C005 2
1. Purchase the recirculating kit per the part number above.
2. Secure the air diverter plate to the wall below the duct cover bracket with (2) screws. Run the 6"
ducting from the top of the hood and secure it to the air diverter plate (FIG. C).
1 2
10-5/8"
(270mm)
FIG. C
16 Roma Groove Use, Care, and Installation Guide