ZEPHYRONLINE.COM
Recirculating Kit Installation (required if no ducting is used)
3. Remove the baffle filters from the hood. Place the
charcoal filters to the back side of the baffle filters.
Secure the charcoal filters in place with rubber
clips or magnets, depending on the filter design.
NOTE: Remove all the black foam from the filter
opening before installing the charcoal filters
(FIG. D).
4. Reinstall the baffle filters.
5. Charcoal filters must be replaced after every 120
hours of use (or approximately every 3 to 4 months,
based on an average of 1 - 2 hours of daily cooking
time).
NOTE: DO NOT WASH CHARCOAL FILTERS. Charcoal
filters may need to be changed more often
depending on cooking habits.
Roma Groove Use, Care, and Installation Guide
Installation Instructions
Clip
Magnet
Clip
Magnet
FIG. D
17