Ductless Recirculation - Zephyr Venezia ZVE-E30DS Guide D'utilisation, D'entretien Et D'installation

Installation Instructions

Ductless Recirculation

Ductless recirculation is intended for applications where an exhaust duct work is not possible to be
installed. When converted, the hood functions as a recirculating hood rather than an exhaust hood.
Fumes and exhaust from cooking are drawn and filtered by a set of optional charcoal filters. The air is
then purified and re-circulated back within the home.
We recommend to ALWAYS exhaust air outside of the home by employing existing or installing new
duct work, if possible. The hood is most effective and efficient as an exhaust hood. Only when the
exhaust option is not possible should you recourse to converting the hood into a recirculating hood.
When converted to be a recirculating hood, a set of charcoal filters are required on top of its standard
Metal Filter set. Order according to its part number below. The standard mesh filters are intended to
capture residue from cooking, and the optional charcoal filters help to purify fumes exhausted from
cooking for recirculation.
Recirculating Kit Installation (required if no ducting is used)
Kit includes the charcoal filters and the air diverter plate.
Hood Model
ZVE-E30DS
ZVE-E36DS
ZVE-E42DS
1. Purchase recirculating kit per the part number above.
2. Secure air diverter plate to wall below duct cover bracket. (FIG. C) Run 8" ducting from top of
hood and secure to air diverter plate. See manual included with recirculating kit for more detailed
instructions.
3. Remove baffle filters from hood. Place the charcoal filters to the back side of the baffle filters.
Secure the charcoal filters in place with rubber clips. (FIG. C).
4. Re-install baffle filters.
16
Part Number
ZRC-03VE
ZRC-03VE
ZRC-03VE
Venezia Use, Care, and Installation Guide
C O R E
V E N E Z I A
WA L L
Filters in Package
2
2
2