Baby Lock BLMJZ-FM Instructions

Sewing Accessories
Free-Motion
Darning Foot
(BLMJZ-FM)
Instructions
MACHINE SETTINGS
Stitch type:
Stitch Width:
Stitch length:
1. Select straight stitch. Set needle in the center needle position.
2. Using drop feed lever, lower feed dog.
3. Remove the presser foot and presser foot holder. Screw the
Darning/Free Motion quilting foot onto the presser bar with
the extended arm of the foot resting above the needle
clamp screw.
4. Holding the needle thread, take one stitch and pull up
bobbin thread through the fabric
5. Lower presser foot lever and start sewing at a slow to
medium speed, moving the fabric back and forth with a
steady rhythm.
6. Turn fabric and sew another layer of stitching across the
first layer of stitching.
CAUTION:
When using Darning/Free Motion quilting foot on machine
with zig-zag stitches do not set the stitch width any wider
than 4.0. Otherwise needle may deflect and hit the
Darning/Free Motion quilting foot causing damage to
machine or personal injury.
LNIS-BLMJZ-FM
Baby Lock
Straight Stitch
3.5
0-4
www.BabyLock.com
Brought to You by Tacony Corporation ® .