Taurus BAPI 750 INOX Mode D'emploi page 10

by using the speed regulator control (A). This
function is very useful, as it makes it possible
to adapt the speed of the appliance to the type
of work that needs to be done.
TURBO FUNCTION:
- The appliance has a Turbo function. By acti-
vating the Turbo function all the power of the
motor becomes available, thus obtaining a finer
finish in the final texture of the product.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance by releasing the pressure
on the on/off button.
- Unplug the appliance from the mains.
- Clean the appliance.
ACCESSORIES:
STICK BLENDER ACCESSORY (FIG.2):
- This accessory is used for making sauces,
soups, mayonnaise, milkshakes, baby food ...
- Attach the stick blender to the motor body by
turning it into the direction indicated by the
arrow (Fig.2.1).
- Put the food to be prepared in the measuring
cup and switch the appliance on.
- For further cleaning, detach and remove the
stick by turning in the opposite direction of the
arrow (Fig.2.3).
CHOPPING ACCESSORY (FIG.3):
- This accessory is used to chop vegetables,
nuts or meat...
- To avoid damage to the appliance, remove
bones, nerves, cartilage, etc. from the meat.
- Fit the adapter fitting to the motor unit by tur-
ning it in the direction of the arrow (Fig.3.1).
- Attach the unit to the lid until hear the click (Fig.
3.2)
- Put the food to be prepared in the chopping
container and attach the lid firmly (Fig.3.3).
- Start the appliance. Warning: do not start the
appliance on if the whole unit is not properly
fitted and connected together (Fig.3.4).
- Stop the appliance when the food reaches the
desired texture.
- Detach the unit from the lid, and release the
adapter fitting (Fig.3.5).
WHISK ACCESSORY (FIG.4):
- This accessory is used to whip cream, beat
egg whites...
- Insert the whisk into the adapter fitting (I).
Attach the unit to the motor body and turn in
the direction of the arrow (Fig.4.1).
- Put the food into a large receptacle and switch
the appliance on. For best results, turn the
whisk clockwise.
- Remove the whisk accessory and release the
adapter fitting. (Fig.4.2).
- Note 1: Do not work at high speeds with this
accessory attached, as this would cause de-
fects in the whisk (spinning its wires).
- Note2: To free the whisk (H) from the adapter
fitting (I), pull the ring on the whisk.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- During the cleaning process, take special care
with the blades, as they are very sharp.
- It is advisable to clean the appliance regularly
and remove any food remains.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.
- The following pieces may be washed in a dis-
hwasher (using a soft cleaning program):
- Whisk
- Measuring cup.
- Chopper.
- Blender leg
- The draining/drying position of the articles
washable in the dishwasher or in the sink must
allow the water to drain away easily (Fig.5).
- Then dry all parts before its assembly and
storage.